Icon A Container

Options as standard are listed in the description below. Features that are an extra cost can be selected here. Use the photos for more details.

Please get in touch for advice regarding measurements and options.

Hersteller: Aerodyne
Lieferzeit: 16-22 Wochen
Geschätzte Versandkosten: £10.00

Please ensure you are familiar with the criteria for selecting riser length before selecting any non-default option.

£2,900.00

Design your icon here.

Your icon container (A or V) comes with the following as standard:

  • Miniforce™ 3-ring system
  • Dakine© hook knife (left leg strap)
  • Spacer foam
  • Riser ramps
  • Hip rings
  • RSL
  • Reversed yoke stitching
  • Stainless steel hardware
  • Free choice of:
    • Main handle (freefly/hackey/plastic)
    • Standard or extended length
    • Ballistic material
    • Chest rings (full articulation)
    • Single / split leg pads

Standard on Icon A:

  • Spacer foam backpad
  • Double magnet riser covers
  • Embroidered A on reserve flap
  • Metal d-ring reserve handle
  • Hackey main handle

Additional Options

  • Aerofit backpad
  • Universal mount (right mudflap)
  • Wingsuit modification (dynamic corners)
  • Soft reserve handle
  • Triple magnetic riser covers
  • Semi stowless d-bag
  • Skyhook
  • Black hardware
  • Bellyband, bellyband with universal mount (Cobra buckles)
  • Weightbelt (Cobra buckles)
  • Logo on sidewall and/or right mud flap
  • Contrast stitching

Aerodyne table comparing Icon V, A, and Student.

These are the most popular choices, further options are available and can be discussed in more detail.

Customisable embroidery is also available to be added to the cutaway handle, soft reserve handle, sidewalls, and ring covers.

All icons have the miniforce™ 3-ring system. The elongated middle ring makes it easier to cut away, due to the improved lever effect. This system reduces the pull force required to cut away by up to 35% compared to other traditional mini 3-ring systems.

Anti-snag tuck tabs are used for pin protection, bridles are fully covered, risers are fully covered and guided into the main container with special riser ramp panels to aid in ensuring risers and lines are not snagged on the reserve container during accidental deployments. 

The universal mount is GoPro compatible and can be used for devices such as cameras, altimeters, etc..

There is also a 'Student Icon' with adjustable harness as standard, and options including AFF boc pocket, spring loaded pilot chutes, and static line attachments.

Design your icon here.

Your icon container (A or V) comes with the following as standard:

  • Miniforce™ 3-ring system
  • Dakine© hook knife (left leg strap)
  • Spacer foam
  • Riser ramps
  • Hip rings
  • RSL
  • Reversed yoke stitching
  • Stainless steel hardware
  • Free choice of:
    • Main handle (freefly/hackey/plastic)
    • Standard or extended length
    • Ballistic material
    • Chest rings (full articulation)
    • Single / split leg pads

Standard on Icon A:

  • Spacer foam backpad
  • Double magnet riser covers
  • Embroidered A on reserve flap
  • Metal d-ring reserve handle
  • Hackey main handle

Additional Options

  • Aerofit backpad
  • Universal mount (right mudflap)
  • Wingsuit modification (dynamic corners)
  • Soft reserve handle
  • Triple magnetic riser covers
  • Semi stowless d-bag
  • Skyhook
  • Black hardware
  • Bellyband, bellyband with universal mount (Cobra buckles)
  • Weightbelt (Cobra buckles)
  • Logo on sidewall and/or right mud flap
  • Contrast stitching

Aerodyne table comparing Icon V, A, and Student.

These are the most popular choices, further options are available and can be discussed in more detail.

Customisable embroidery is also available to be added to the cutaway handle, soft reserve handle, sidewalls, and ring covers.

All icons have the miniforce™ 3-ring system. The elongated middle ring makes it easier to cut away, due to the improved lever effect. This system reduces the pull force required to cut away by up to 35% compared to other traditional mini 3-ring systems.

Anti-snag tuck tabs are used for pin protection, bridles are fully covered, risers are fully covered and guided into the main container with special riser ramp panels to aid in ensuring risers and lines are not snagged on the reserve container during accidental deployments. 

The universal mount is GoPro compatible and can be used for devices such as cameras, altimeters, etc..

There is also a 'Student Icon' with adjustable harness as standard, and options including AFF boc pocket, spring loaded pilot chutes, and static line attachments.

*
*
*
*